Joined: Jul 08, 2018
|Posted: Tue Nov 27, 2018 7:19 am Post subject: The blinds selection tips
The blinds are assembled in both concealed and surface installed styles. When purchasing, the type of the blinds should be measured according to various assembly methods. Blinds concealed within the window lattice, its length should be just like the height of the particular window, but the width will be reduced by 1~2 cm from your left and right sides of the window. If the shutters are hung outside your window, then the length really should be about 10 cm longer compared to height of the eye-port, and the width is going 5 cm wider compared to sides of the window to make sure a good shading impact. In general, small rooms for example kitchens and toilets are designed with concealed blinds, while large rooms including living rooms, bedrooms, and dens become more suitable for use together with exposed blinds.
Look from quality
The blades belonging to the blinds are an important part of the adjustment blinds. If buying blinds, it is for the best to first touch the louver blades to determine if they are smooth and in many cases, and see if just about every blade will burr. In general, high-quality blinds are better handled with regard to blade details, especially louver blades manufactured from plastic, wood, and bamboo. If the texture is better, its service life shall be longer.
The adjustment rod is additionally an important part from the blinds. The adjustment lever belonging to the blind has two functions, one is to fine-tune the lifting switch in the blind, and the other should be to adjust the angle with the blade. When inspecting the actual adjustment lever, first hang the blinds and endeavor to pull it to see if the lifting switch is smooth, then turn the adjustment lever to find out if the blade is likewise flexible.
The blades and all the accessories, including the wire frame, the adjustment pub, the pull wire, and also the small accessories on the particular adjustment bar, must be kept within the same color.
Check your finish
The smoothness belonging to the blade and the cable frame is felt yourself, and the good top quality product is smooth and also flat, without the experiencing of stabbing hands.
Open the curtain plus test the opening and closing function of the blade
Rotate the modifying rod to open your blade, and the blades should maintain a great level between the blades, that is, the spacing range between the blades is definitely uniform, and the blades are kept straight and have no feeling of bending up and down. When the blades are closed, the blades should be in mutual agreement with the other person without leakage.
Check the particular deformation resistance
After that blade is opened, the blade is often pressed down by hand for making the blade under your bend, and then the hand is quickly produced. If the blade is immediately restored into the horizontal state, no twisting phenomenon appears, indicating the quality is qualified.
Experiment automatic locking function
If your blades are all shut, pull the wire to roll up the blade. At now, pull the wire to the right, the blade need to be automatically locked, keep the corresponding rolled up state, neither continue to retract, nor loose. Otherwise, there is a problem with the locking operate.